Description
The S range of Hot Wire Strip Heaters is available in three working lengths – 600, 1000 and 1500mm. Each machine is fitted with multiple hot wires for performance and versatility.
These units have two wires mounted in a channel at the rear of the work table. Wires are adjustable for spacing and air gap, allowing materials from 0.5 to 8mm to be processed quickly and efficiently. A calibrated workstop allows the user to accurately set the bend position, while a hinged upper beam holds the material in position during the heating cycle. A safety switch de-energises the heating wire when the upper beam is opened, minimizing exposure to heated surfaces.
The machines are bench mounted and easily portable. A range of Folding Jigs is also available to support the material at the correct angle while cooling.
For educational use, the heating wires switch off whenever the upper beam is raised. This, coupled with the fast warm-up and cool-down of the heating wires, ensures maximum safety in operation. For industrial use, a Bypass switch can be activated, leaving the wires switched on at all times for maximum productivity.
Specifications:
| Specifications – 600S | Specifications – 1000S | Specifications 1500S | |
| Voltage | 230 or 115V 50-60Hz | 230 50-60Hz | 230 or 115V 50-60Hz |
| Max Current | 1Amp | 2 Amps | 3 Amps |
| Maximum Working Length | 600mm | 1000mm | 1500mm |
| Maximum Material Thickness | 8mm | 8mm | 8mm |
| Dimensions (Packed) | 1020 x 410 x 230mm | 1420 x 410 x 230mm | 1920 x 410 x 230mm |
| Weight | 20kg | 28kg | 38kg |