Description
This ISE connects to the Wireless pH Sensor and allows students to measure the potential and determine the concentration of chloride ions in an aqueous solution.
This ISE utilizes a standard PVC membrane. As with all ISE implementing this design, the lifespan of the membrane is limited. For this reason, we offer replacement sensor modules (PVC matrix sensor type) which allow you to periodically replace the module, rather than the whole electrode.
PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures. For this reason, they are not recommended for use by elementary or middle school students
What’s Included
- Chloride ISE (Cl- ) Probe
- Chloride ISE Replacement Module
- Chloride Standard Solution 1000 ppm
- Chloride Reference Fill Solution
- Storage Bottle
- Chloride Ionic Strength Adjuster (ISA)
- BNC Male-to-Female Cable
- Solid State ISE Polishing Strips (2)
Specifications
| Range | 1 to 35,000 ppm or mg/L |
| pH range | 2-12 |
| Electrode slope | 56 ± 3 mV/ decade |
| Interferences | CN-, Br-, I-, OH-, S2- must be absent, NH3 |
| Electrode type | PVC Membrane |
Supporting Documents
Safety Sheets
Chloride ISE – Safety Data Sheet